How to Lay Drip Irrigation Belt in Water-saving Irrigation?
Drip irrigation belt is the core product of drip irrigation system and plays a decisive role in the operation effect of drip irrigation system. It is praised as an efficient water-saving equipment in arid and water-deficient areas, which can effectively improve the utilization rate of water and fertilizer and achieve rational planting of water saving and energy saving. Drip irrigation belt is to use plastic pipes to pass water (liquid fertilizer or pesticide, etc.) through a capillary tube with a diameter of about 16mm. It is to slowly pour water into crops through the drip head or drip irrigation belt with a very small inlet of the outlet orifice. There are two kinds of drip irrigation belts: single wing labyrinth drip irrigation belt and embedded patch drip irrigation belt.
Laying of drip irrigation belt:
1. First of all, after the laying of drip irrigation belt is completed, there should be a reserved space of 1-2 meters at both ends of the drip irrigation belt connected with the branch pipe. The reserved length is to prevent the drip irrigation belt from being too tight after the connection is critical, and to prevent the length from being insufficient due to the cutting error during the connection.
2. Uniform force is exerted during the cutting of drip irrigation belt, so that the cut port can be flat and vertical as far as possible, so that it can be evenly stuck and connected when connected with branch pipes and connecting accessories. After water is connected in the drip irrigation belt, it can also receive uniform force under the impact of water pressure, which ensures a stable connection.
3. The connection between drip irrigation belt and branch pipe cannot be bent, and must be straight through. If the length is too long, you can cut it properly. If the drip irrigation belt is bent and placed, it is likely to be blocked and burst after water flow.
4. Drill holes in the branch pipe, and the hole position should be aligned with the laying position of the drip irrigation belt. If the three-way connection is used, the hole is up, and the three-way socket end is connected into the hole.
In the selection of drip irrigation belt, the most important thing is to choose according to the terrain, terrain and the spacing between crops. In order to achieve good results, a reasonable irrigation method can be selected.
In addition, the filter is very important, installation and disassembly is also very convenient, plus it can ensure the clean water quality, avoid pipeline blockage. At the same time, in order to extend the life of the pipeline, experts also suggest that everyone, in the process of use, must pay attention to maintenance.