4L Emitter

Drip irrigation dripper characteristics

1. Silicone sheet inside the dripper can change the section of the water outlet, realize the effect of stable water flow and flow regulation. It can be installed on fruit trees, saplings and forest trees with a relatively long distance, and the distance between the drippers can be adjusted arbitrarily according to the distance between crops. Suitable for various terrains such as plains, mountains, plateaus, terraces, hills, etc.

2. The dripper has a small volume, so it is easy to install. It can be installed on a Φ16 or Φ20 PE pipe, and it can also be buried shallowly in the ground without affecting the work of the ground machinery.

3. The dripper is made of high-quality industrial plastic, which has anti-clogging and anti-corrosion capabilities, and has a long service life.

4. The dripper is a detachable pressure-compensated dripper. The inside of the dripper is a turbulent flow channel, which can keep the dripping uniform. It is divided into upper and lower shells, which can be easily disassembled and cleaned.

Installation tools: mainly Φ3 and Φ4 hole punches (punch holes on the PE branch pipe for installation).

The dripper and the built-in dripper are both types of drip irrigation equipment. In the process of use, you need to understand their differences in order to be better used. Drip irrigation tape wholesalers say that there are several differences:

1. The dripper on the tube, the dripper that can be installed on the capillary on site. The built-in dripper can be directly embedded into the dripper in the polyethylene capillary tube on the production line.

2. The dripper on the pipe can be used flexibly. The installation distance of the dripper can be adjusted on site according to the requirements of crop irrigation to better meet the water requirements of crops. The dripper on the pipe is usually used for irrigating fruit trees, potted plants, trees, shrubs, flowers, etc.

3. The built-in dripper has been installed on the production line at a certain interval before leaving the factory. For field installation, only one connector (bypass) is needed to connect the built-in drip irrigation pipe to the water delivery branch pipe. It saves a lot of installation cost and labor intensity, and improves installation efficiency. It is often used to irrigate fruit trees, vegetables, flowers, and windbreak forest belts.