Micro sprinkler irrigation-manufacture,factory,supplier from China

Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mCommon overall performance trends:The structure layout is cheap, whilst the water strain is small, it can also irrigateIt is appropriate for irrigation of fruit tree, shrub nursery, narrow garden and special flora, irrigation and cooling of greenhouse plantsThe rotary sprin

Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needs.Inserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler. At the same time, it can maintain a certain height of the sprinkler from the ground.

With the continuous maturity of technology, more and more irrigation equipment is used in farmland irrigation. Among them, drip irrigation belt and micro-sprinkler belt are the most used irrigation tools. Although the names of these two kinds of irrigation equipment are similar, they are two kinds of irrigation equipment.

Subsurface drip irrigation structures follow water immediately to the crop root quarter thru buried plastic tapes with embedded emitters.The essential advantage of us structures is their water-use efficiency, in comparison to sprinkler irrigation or furrow irrigation structures. Because drip tapes are buried at approximately 12 inches beneath floor floor (this will range relying on soil kind and crop) and the soil floor remains dry, water loss because of evaporation and runoff are minimized.Another massive benefit of us is its flexibility to irrigate irregular-fashioned fields.

The Hose Tubing is crafted from new PVC material, long lasting non-poisonous and eco-friendly.Flexible: Industry main flexibility permits tighter turns with fewer elbows for fast, clean set up in garden, flower bed, floor cowl or different landscaped regions.Function: Use as the primary line in a small Drip irrigation gadget or to department off from large tubing to micro-watering gadgetCompatible with maximum manufacturers of 16mm pipe Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays.Perfect for small, slender and tight planting regions, in addition to regions with

Major motive:While it's miles set up upside down, it is used for cutting seedling cultivation in the greenhouse and temperature manipulate. the project fee is incredibly low.Used for temperature manipulate of greenhouse or rooster farm.Technical parameters of go atomizing sprinkler: drift charge 35l/h, variety zero.7m

FeaturesColor: As the pix shown.Material: ABS, plastic.Premium quality - 3 arm + ABS plastic rotary garden sprinkler with Ground Rod.Effective water sprinkler irrigation machine - patented layout of water-saving tool may be centered to keep water maximum with the aid of using adjusting the water density, length and scope.Easy use - join water joint to the connector and tap.Long spray distance - as much as 26ft-32.8ft distance with worldwide general pipes.Different spray direction - direct or forty five degree.Spraying distance: upward 2.5-3m, lateral 4-5m Connection length: half of Inch M

Micro-irrigation and fertilization is a water-saving, fertilizer-saving, and high-efficiency agricultural production technology that uses a fertilization device to inject fertilizer into the micro-irrigation system under the condition of pressurized water source, and uniformly and stably transports it to the soil in the root zone of the crop at a small flow rate.2. Micro-irrigation and fertilization facilitiesThe micro-irrigation system is generally drip irrigation. Each row of watermelons is laid with a drip irrigation pipe.

In recent years, there are a variety of popular orchard irrigation methods, such as immersion irrigation, manual irrigation, water-saving irrigation, high-level sprinkler irrigation, and simple sprinkler irrigation. However, these technologies all have their shortcomings more or less. The cost of immersion irrigation is high, and the cost of manual irrigation is high. The effect is relatively poor. Water-saving water-saving irrigation has low one-time investment, high water-saving efficiency, simple maintenance in the later stage, and high-level sprinkler irrigation.

1 Automatic irrigation       This technology was invented by the French National Institute of Agronomy. They developed an automatic irrigation device, that is, in the fruit branch and other parts, placed some special "tentacles" to test the crop of subtle changes.

Micro-spray TapeMicro-spray Tape are useful devices which can make the most of a low-pressure drip irrigation system. They install along taller vegetation or are used to hit a few flora with extra water needs whilst leaving much less-needy plant life by myself. They’re designed with progressed spray-range over other emitter-kinds with the identical strain.

The prevailing tree irrigation strategies specially include drip irrigation and micro-spraying.