Micro sprayer-manufacture,factory,supplier from China

(Total 24 Products for Micro sprayer)
Micro spray beltBasically put an end to the chance of pests and diseases infestation.
  Contact Now
Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseSimple atomizing micro-sprinklerWorking pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.3601.0-1.5
  Contact Now
Micro spray beltBasically put an end to the chance of pests and diseases infestation.
  Contact Now
Micro spray beltBasically put an end to the chance of pests and diseases infestation.
  Contact Now
Micro spray beltBasically put an end to the chance of pests and diseases infestation.
  Contact Now
Micro spray beltBasically put an end to the chance of pests and diseases infestation.
  Contact Now
The composition of ground-inserting micro-sprinkler, inserting rod, capillary, capillary double joint and epsilon-type adapter.Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needsInserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler.
  Contact Now
Micro spray beltImprove fertilizer efficiency, apply drip irrigation technology, base fertilizer, topdressing concentrated water penetrates slowly in the soil to avoidThe loss of nutrients is conducive to the uniform absorption of nutrients and water by the crops, thereby improving the utilization rate of fertilizer efficiency.Micro spray beltIt can keep the soil loose and small, and the soil gap is moderate, which reduces the acidification and salt of the soil.The degree of chemical conversion creates a good soil environment for the normal growth of crops, and the crop growth is consistent.Mi
  Contact Now
Performance characteristics:The sprinkler is completely imported from Israeli technology and adopts a vortex nozzle design to provide vortex spray flow and minimize the possibility of cloggingThe atomization effect is good. With the help of the anti-dripping device, the phenomenon of dripping and damage to the seedlings after spraying can be effectively avoidedDetachable structure, easy to maintain.
  Contact Now
Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.22-0.2824-331.0-1.5
  Contact Now
The product has many types, with the characteristics of quick and convenient connection and disassembly, good sealing performance, high strength and long service life. It is widely used in field micro -spray irrigation project.
  Contact Now
Plastic filters are mainly used for irrigation with better water quality or in combination with other forms of filters when the water quality is poor, as final filter equipment. The mesh filter is suitable for water purification and filtration in water-saving irrigation such as drip irrigation, micro-sprinkler irrigation, and small-pipe outflow irrigation in greenhouses, greenhouses, small farmland, landscaping, flower cultivation and other fields. The main models are: Φ32, Φ40, Φ50, Φ63.
  Contact Now
Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.1-0.2flow (Lh)40.50spraying radius (m)12-15
  Contact Now
Performance:It is made of engineering plastics and has high processing precision. The intensity of sprinkling irrigation is low and the range is long.Applicability:It is widely used for irrigation of flowers, green space, fruit trees, greenhouse crops and plants.Advantage:Small flow, high irrigation uniformity, and provide growth humidity for plant growth;;The effect of water-saving and increasing production is obvious, and the anti-clogging performance is better than that of drip irrigation.
  Contact Now
Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.2550,60,703-4
  Contact Now
When the pressure water is ejected from the nozzle of the sprinkler, it impacts the deflector through the baffle plate to make the rocker produce tangential motion force around the angle of rotation of the cantilever. Then it returns and impacts the nozzle under the action of the spring of the sprinkler to make the nozzle rotate an angle. Repeat the action, the sprinkler can rotate in full circle.
  Contact Now
Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters: Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.240-501.2-1.5
  Contact Now
Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 6mWorking pressure (Mpa)0.1-0.25flow (Lh) 50,60,70spraying radius (m) 3-4
  Contact Now
Performance characteristics:The spraying water drop is very small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.22-0.28flow (Lh) 24-33spraying radius (m)1.0-1.5
  Contact Now
 It is suitable for PE water supply pipe and PVC water supply pipe as the main pipe of drip irrigation. The branch pipe is suitable for 16mm PE coil pipe, 16 drip irrigation pipe, micro-spray irrigation 16 capillary pipe 16 PE pipe, etc.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.
  Contact Now
Performance characteristics:When the system pressure changes in the range of 0.05-0.35Mpa, the outflow remains unchanged, and the uniformity of irrigation can reach more than 98%; For larger trees, annular drip irrigation pipes should be installed at the outlet of the current stabilizer to ensure that the trees can be irrigated all around; the bidirectional anti-clogging design of the shunt pipe can ensure the long-term stable movement of the equipment undergroundSteady flow - small pipe outflow irrigationPressure range: 0.05-0.4Mpe; Flow specification: 10L/:20L/h.
  Contact Now
Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life. Anti-solarization, anti-aging, durability, high gloss, high quality, good corrosion resistance.Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.
  Contact Now
Relate News
Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mCommon overall performance trends:The structure layout is cheap, whilst the water strain is small, it can also irrigateIt is appropriate for irrigation of fruit tree, shrub nursery, narrow garden and special flora, irrigation and cooling of greenhouse plantsThe rotary sprin
Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needs.Inserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler. At the same time, it can maintain a certain height of the sprinkler from the ground.
The Hose Tubing is crafted from new PVC material, long lasting non-poisonous and eco-friendly.Flexible: Industry main flexibility permits tighter turns with fewer elbows for fast, clean set up in garden, flower bed, floor cowl or different landscaped regions.Function: Use as the primary line in a small Drip irrigation gadget or to department off from large tubing to micro-watering gadgetCompatible with maximum manufacturers of 16mm pipe Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays.Perfect for small, slender and tight planting regions, in addition to regions with
With the continuous maturity of technology, more and more irrigation equipment is used in farmland irrigation. Among them, drip irrigation belt and micro-sprinkler belt are the most used irrigation tools. Although the names of these two kinds of irrigation equipment are similar, they are two kinds of irrigation equipment.
Micro-spray TapeMicro-spray Tape are useful devices which can make the most of a low-pressure drip irrigation system. They install along taller vegetation or are used to hit a few flora with extra water needs whilst leaving much less-needy plant life by myself. They’re designed with progressed spray-range over other emitter-kinds with the identical strain.
Micro-irrigation and fertilization is a water-saving, fertilizer-saving, and high-efficiency agricultural production technology that uses a fertilization device to inject fertilizer into the micro-irrigation system under the condition of pressurized water source, and uniformly and stably transports it to the soil in the root zone of the crop at a small flow rate.2. Micro-irrigation and fertilization facilitiesThe micro-irrigation system is generally drip irrigation. Each row of watermelons is laid with a drip irrigation pipe.
The prevailing tree irrigation strategies specially include drip irrigation and micro-spraying.
1. Applicable conditionsThe water and fertilizer integrated machine fertilization system is mainly suitable for facility agricultural cultivation, orchard cultivation, cotton and other field economic crop cultivation, as well as other crops with better economic benefits. It is suitable for promotion and application in areas where there are wells, reservoirs, storage tanks and other fixed water sources, and the water quality is good, meets the requirements of micro-irrigation, and has built or has conditions to build micro-irrigation facilities.2.
Major motive:While it's miles set up upside down, it is used for cutting seedling cultivation in the greenhouse and temperature manipulate. the project fee is incredibly low.Used for temperature manipulate of greenhouse or rooster farm.Technical parameters of go atomizing sprinkler: drift charge 35l/h, variety zero.7m
I. Composition of the microirrigation systemThe micro-irrigation system is composed of water source, front hub, water transmission and distribution pipe network, irrigation device, flow rate, pressure control parts and measuring instrument.1. Water sourceRivers, channels, lakes, reservoirs, wells and springs can be used as microirrigation water sources, and their water quality should meet the requirements of microirrigation.2.
1. AdvantagesSave water, fertilizer and laborDrip irrigation is a full pipeline water delivery and local micro-irrigation, which reduces the leakage and loss of water to the lowest limit. At the same time, because it can supply the water required by the crop root zone in a timely manner, there is no problem of peripheral water loss, and the water use efficiency is greatly improved. Irrigation can be conveniently combined with fertilization, that is, dissolve the chemical fertilizer and pour it into the irrigation system.
Offer amazing insulation. tube protects the, metallic, cable, wood and and many others towards to quick circuit, corrosion, oxidation, decay, abrasion, fracture and and many others. software location; can used for sealing reason of power, facts, telecom cables and automotive, digital, plane, train, subway, port etc.