Micro spray Insert the sprinkler in the spring-manufacture,factory,supplier from China

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

Performance characteristics:The sprinkler is completely imported from Israeli technology and adopts a vortex nozzle design to provide vortex spray flow and minimize the possibility of cloggingThe atomization effect is good. With the help of the anti-dripping device, the phenomenon of dripping and damage to the seedlings after spraying can be effectively avoidedDetachable structure, easy to maintain.

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.22-0.2824-331.0-1.5

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

The composition of ground-inserting micro-sprinkler, inserting rod, capillary, capillary double joint and epsilon-type adapter.Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needsInserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler.

When the pressure water is ejected from the nozzle of the sprinkler, it impacts the deflector through the baffle plate to make the rocker produce tangential motion force around the angle of rotation of the cantilever. Then it returns and impacts the nozzle under the action of the spring of the sprinkler to make the nozzle rotate an angle. Repeat the action, the sprinkler can rotate in full circle.

Micro spray beltImprove fertilizer efficiency, apply drip irrigation technology, base fertilizer, topdressing concentrated water penetrates slowly in the soil to avoidThe loss of nutrients is conducive to the uniform absorption of nutrients and water by the crops, thereby improving the utilization rate of fertilizer efficiency.Micro spray beltIt can keep the soil loose and small, and the soil gap is moderate, which reduces the acidification and salt of the soil.The degree of chemical conversion creates a good soil environment for the normal growth of crops, and the crop growth is consistent.Mi

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseSimple atomizing micro-sprinklerWorking pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.3601.0-1.5

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

Micro spray beltBasically put an end to the chance of pests and diseases infestation.

The 360 degree pressure-compensated ground-inserting fountain sprinkler is made of new PP material with antioxidants and anti-ultraviolet additives, which is resistant to aging and has a long service life. There are 8 water outlets on the top of the pressure-compensated ground-inserting fountain sprinkler, which form a spraying-shape. It has pressure compensation function, and doesn't need manual adjustment. It can spray water evenly under different pressures.

Plastic filters are mainly used for irrigation with better water quality or in combination with other forms of filters when the water quality is poor, as final filter equipment. The mesh filter is suitable for water purification and filtration in water-saving irrigation such as drip irrigation, micro-sprinkler irrigation, and small-pipe outflow irrigation in greenhouses, greenhouses, small farmland, landscaping, flower cultivation and other fields. The main models are: Φ32, Φ40, Φ50, Φ63.

Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.2550,60,703-4

Performance characteristics:The spraying water drop is very small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.22-0.28flow (Lh) 24-33spraying radius (m)1.0-1.5

The product has many types, with the characteristics of quick and convenient connection and disassembly, good sealing performance, high strength and long service life. It is widely used in field micro -spray irrigation project.

 It is suitable for PE water supply pipe and PVC water supply pipe as the main pipe of drip irrigation. The branch pipe is suitable for 16mm PE coil pipe, 16 drip irrigation pipe, micro-spray irrigation 16 capillary pipe 16 PE pipe, etc.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.1-0.2flow (Lh)40.50spraying radius (m)12-15

Performance:It is made of engineering plastics and has high processing precision. The intensity of sprinkling irrigation is low and the range is long.Applicability:It is widely used for irrigation of flowers, green space, fruit trees, greenhouse crops and plants.Advantage:Small flow, high irrigation uniformity, and provide growth humidity for plant growth;;The effect of water-saving and increasing production is obvious, and the anti-clogging performance is better than that of drip irrigation.

16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

The pull ring plug of drip irrigation tape is a fitting used with drip irrigation tape. It is used for the end sealing of drip irrigation tape, which plays a role of flow closure.Specification and model: 16mm, PE materialUsage:Cut the end of drip irrigation tape with scissors and insert it between the blue pull ring and black part of the pipe fitting.Pull the blue pull ring outward and clamp the drip irrigation tape tightly.

At present, the built-in cylindrical drip irrigation pipe is Φ16 type drip irrigation pipe. According to the wall thickness, drip irrigation pipes can be divided into three types: 0.6mm, 0.8mm and 1.0mm. The normal working pressure is 0.08MPa-0.1MPa.

The appearance of simple three-way makes the installation of pipe and pipe fittings more convenient and quick in the project. It is made of engineering plastics, corrosion resistant, easy to install and use, and has long service life and economic and practical application.

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters: Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.240-501.2-1.5