Irrigation reversed lock-nut pipe straight through valve-manufacture,factory,supplier from China

Lock-nut bypass parameterNameLarge hole lock-nut bypassSpecifications16-16mm  12-16mmPackageBaggedQuantity2000 pieces/ bagSales modelWholesale, agencyMaterialSpecial materials have strong aging resistanceApplicable conditionsThe main pipes are PE irrigation pipe and PVC irrigation pipe

16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

PE socket straight through valve is widely used in agricultural water-saving irrigation project. For example, small pipe outflow project and drip irrigation system (drip irrigation pipe), some projects that use PE pipes, and PEΦ16 or 20 capillary drip irrigation systems, etc.Through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.

Installation and usage: the product is used in the project of PE small pipe or drip irrigation pipe. Compared with the traditional PE socket straight through and bypass, the advantages are that the user can adjust the switch of each irrigation pipe tape and increase the controllability of the system.through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.

There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.

Features: drip irrigation tape can connect main pipe (water tape) instantly. The bypass has its own valve, and the water flow can be adjusted at will.Precautions for installation:1.It is mainly used for connection of main water tape, PE water tape(wall thickness 0.7-3.0mm), etc.

The pull ring straight through is used for the connection between drip irrigation tape and drip irrigation tape. Through the reasonable use of pull ring straight through, some shorter drip irrigation tapes can be reused, saving materials and reducing the project cost.Instructions: when in use, insert the pull ring straight through into the drip irrigation tape, and then use the pull ring to lock the drip irrigation tape. The operation method on the other side is the same.

Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life.

 It is suitable for PE water supply pipe and PVC water supply pipe as the main pipe of drip irrigation. The branch pipe is suitable for 16mm PE coil pipe, 16 drip irrigation pipe, micro-spray irrigation 16 capillary pipe 16 PE pipe, etc.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

Drip irrigation : The inlaid drip irrigation pipe is an integrated drip irrigation pipe with a cylindrical dripper embedded on the inner wall of the pipe. The dripper is assembled on the inner wall of the pipe while producing the pipe, which is easy to install and use.Classification1. According to the water outlet method, it is divided into:Pressure Compensated Drip Irrigation Pipes and Non-Pressure Compensated Drip Irrigation Pipes2. According to the structure can be divided into:In-line drip irrigation pipe and inter-pipe drip irrigation pipeapplicationApplicable conditions:1.

Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life.

Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life. Anti-solarization, anti-aging, durability, high gloss, high quality, good corrosion resistance.Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.

Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.

The three-way is pipe fittings and pipe connectors. Also known as pipe three-way or three-way pipe fittings, three-way joint, used in the main pipe to branch pipe.The three-way has three openings, namely one inlet and two outlets; Or a chemical pipe fittings with two inlets and one outlet, there are T-shape and Y-shape with equal diameter orifice or reducing orifice, which are used for the convergence of three same or different pipelines. The main function of three-way is to change the direction of fluid.

Suitable for spray irrigation and drip irrigation 16mm PE pipePurpose: used for 16mm PE pipe connecting PE main pipe, PVC main branch bypass joint switch

Product features:Connect 16 / 20mm PE pipe and butt with 16 / 20 mm PE pipeHigh strength product16/20MM socket-typeFunctions: 1. On-off valve 2. Regulating flow 3.

Set combination  Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries  Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way

The drip irrigation belt uses a plastic pipe (drip irrigation pipe lead) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the root of the crop for local irrigation. It is a dripper or drip irrigation belt with a very small outlet orifice, which drips water evenly and slowly into the soil near the roots of the crops.1. The built-in dripper has its own filter window, which has good anti-blocking performance.2. Turbulent flow channel design. Water evenly.3. The dripper and pipeline have strong integrity,4.

The pressure compensation drip irrigation pipe is made of high-density PE pipe with improved nanotechnology and built-in pressure compensation emitter. It is suitable for complex terrain and has the characteristics of good uniformity, strong anti-clogging ability and long service life.The commonly used model of pressure compensation drip irrigation pipe is Φ16. The distance between the emitters is 300mm (200), the wall thickness is 0.6mm, 0.8mm and 1.0mm.

Product features: soft tape bypass valve has its own valve, which can control and adjust the flow of each drip irrigation tape at will.Precautions for installation: 1. mainly used for connection of main water tape, PE water tape(wall thickness 0.6-1.6mm), etc.2.The fittings of this specification are connected between the soft drip irrigation tapes with inner diameter of 16mm.

Functions: 1. On-off valve 2. Regulating flow 3.

The pull ring plug of drip irrigation tape is a fitting used with drip irrigation tape. It is used for the end sealing of drip irrigation tape, which plays a role of flow closure.Specification and model: 16mm, PE materialUsage:Cut the end of drip irrigation tape with scissors and insert it between the blue pull ring and black part of the pipe fitting.Pull the blue pull ring outward and clamp the drip irrigation tape tightly.

Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.