double lock-nut straight connector-manufacture,factory,supplier from China

(Total 24 Products for double lock-nut straight connector)
Lock-nut bypass parameterNameLarge hole lock-nut bypassSpecifications16-16mm  12-16mmPackageBaggedQuantity2000 pieces/ bagSales modelWholesale, agencyMaterialSpecial materials have strong aging resistanceApplicable conditionsThe main pipes are PE irrigation pipe and PVC irrigation pipe
  Contact Now
16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.
  Contact Now
The pull ring straight through is used for the connection between drip irrigation tape and drip irrigation tape. Through the reasonable use of pull ring straight through, some shorter drip irrigation tapes can be reused, saving materials and reducing the project cost.Instructions: when in use, insert the pull ring straight through into the drip irrigation tape, and then use the pull ring to lock the drip irrigation tape. The operation method on the other side is the same.
  Contact Now
Set combinationMultiple combinations can meet your various needsA One-outlet one small straight drip arrow + double hookOne 3 / 5 double barb50cm3/5PVC capillary1 small straight drip arrowOne-outlet one big straight drip arrow + double hookBOne 3 / 5 double barb50cm3/5PVC capillaryOne big straight drip arrowCOne-outlet one curved drip arrow + double hookOne 3 / 5 double barb50cm3/5PVC capillary  One curved drip arrow
  Contact Now
Suitable for spray irrigation and drip irrigation 16mm PE pipePurpose: used for 16mm PE pipe connecting PE main pipe, PVC main branch bypass joint switch
  Contact Now
There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.
  Contact Now
Functions: 1. On-off valve 2. Regulating flow 3.
  Contact Now
 It is suitable for PE water supply pipe and PVC water supply pipe as the main pipe of drip irrigation. The branch pipe is suitable for 16mm PE coil pipe, 16 drip irrigation pipe, micro-spray irrigation 16 capillary pipe 16 PE pipe, etc.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.
  Contact Now
Set combination  Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries  Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way
  Contact Now
Installation and usage: the product is used in the project of PE small pipe or drip irrigation pipe. Compared with the traditional PE socket straight through and bypass, the advantages are that the user can adjust the switch of each irrigation pipe tape and increase the controllability of the system.through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.
  Contact Now
Set combination Multiple combinations can meet your various needsAOne-outlet three small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way water separatorThree 50cm3/5PVC capillaries  Three small straight drip arrowsBOne-outlet three small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 four-way water separatorThree 50cm3/5PVC capillariesThree small straight drip arrowsCOne-outlet three big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way&
  Contact Now
PE socket straight through valve is widely used in agricultural water-saving irrigation project. For example, small pipe outflow project and drip irrigation system (drip irrigation pipe), some projects that use PE pipes, and PEΦ16 or 20 capillary drip irrigation systems, etc.Through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.
  Contact Now
The three-way is pipe fittings and pipe connectors. Also known as pipe three-way or three-way pipe fittings, three-way joint, used in the main pipe to branch pipe.The three-way has three openings, namely one inlet and two outlets; Or a chemical pipe fittings with two inlets and one outlet, there are T-shape and Y-shape with equal diameter orifice or reducing orifice, which are used for the convergence of three same or different pipelines. The main function of three-way is to change the direction of fluid.
  Contact Now
Features: drip irrigation tape can connect main pipe (water tape) instantly. The bypass has its own valve, and the water flow can be adjusted at will.Precautions for installation:1.It is mainly used for connection of main water tape, PE water tape(wall thickness 0.7-3.0mm), etc.
  Contact Now
The composition of ground-inserting micro-sprinkler, inserting rod, capillary, capillary double joint and epsilon-type adapter.Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needsInserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler.
  Contact Now
Model: Φ16mmMaterial: PEProduct advantages and characteristics:1.Scientific design, compact size, light weight, good sealing and interchangeability.2.Simple structure, convenient operation, quick connection and disassembly, strong flexibility, easy to recycle, beautiful and practical.3.Stable chemical properties, excellent performance, good cold-resistance, anti-aging, long service life.4.Compact size, light weight, good sealing and interchangeability.5.It is suitable for various working conditions and widely used in various media such as gas, liquid, powder, etc.
  Contact Now
Set combination  Multiple combinations can meet your various needsAOne-outlet four big straight drip arrow +current stabilizerOne 2L, 4L, 8L current stabilizerOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries Four big straight drip arrowsBOne-outlet four curved drip arrows + single hook  One 4/7 to 3/5 single hookOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries  Four curved drip arrowsCOne-outlet four curved drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 five-way water sep
  Contact Now
The pull ring plug of drip irrigation tape is a fitting used with drip irrigation tape. It is used for the end sealing of drip irrigation tape, which plays a role of flow closure.Specification and model: 16mm, PE materialUsage:Cut the end of drip irrigation tape with scissors and insert it between the blue pull ring and black part of the pipe fitting.Pull the blue pull ring outward and clamp the drip irrigation tape tightly.
  Contact Now
Principle: when the water flows through the conical tank, it will rotate and generate centrifugal force, so that the sediment and solid particles with higher density in the water resources will enter the sand settling tank, and the clear water enters the Y-shaped net filter from S-bend (C-bend) for secondary filtrationPrecautions:1. The centrifugal filter sand tank is equipped with a sand discharge port.
  Contact Now
Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.
  Contact Now
Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.
  Contact Now
Product features:Connect 16 / 20mm PE pipe and butt with 16 / 20 mm PE pipeHigh strength product16/20MM socket-typeFunctions: 1. On-off valve 2. Regulating flow 3.
  Contact Now
Purpose: the drip irrigation system uses the product when the tape is the main pipe. Branch water source, the main pipeline (soft tape) is connected with drip irrigation tape, so that the water in the main pipeline (soft tape) flows into the drip irrigation tape respectively.Usage: use a puncher (14mm in diameter) to make a hole on the side of the soft water tape, and then rotate the three-way into the soft tape hole, tighten the nut to fix the bypass on the soft water tape, and connect the drip irrigation tape on the other sideParameters:Model:16mmMaterial: PE plastic
  Contact Now
Relate News
Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needs.Inserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler. At the same time, it can maintain a certain height of the sprinkler from the ground.
FeaturesColor: As the pix shown.Material: ABS, plastic.Premium quality - 3 arm + ABS plastic rotary garden sprinkler with Ground Rod.Effective water sprinkler irrigation machine - patented layout of water-saving tool may be centered to keep water maximum with the aid of using adjusting the water density, length and scope.Easy use - join water joint to the connector and tap.Long spray distance - as much as 26ft-32.8ft distance with worldwide general pipes.Different spray direction - direct or forty five degree.Spraying distance: upward 2.5-3m, lateral 4-5m Connection length: half of Inch M
This product is used when the drip irrigation system uses tape as the main pipeline. The branch water source, the main pipeline (soft belt) is connected with the drip irrigation belt, so that the water in the main pipeline (soft belt) flows into the drip irrigation belt separately.Use a punching machine (diameter 14mm) to make holes on the side of the soft water belt, then screw the tee into the hole of the soft water belt, tighten the nut to fix the bypass on the soft water belt, and connect the soft water belt to the other side of the drip irrigation belt.
Pipe failure in long-term applications is characterised by creep crack initiation and creep crack growth. Both can be determined by fracture mechanics-based tests of the pipe materials. Nowadays, several accelerated tests are available: Considering new fiber composite polyethylene (pe) substances are contemplated for use by means of fuel industry, a chief assignment is to carry out a computational evaluation for the cracked and uncracked pipes. That is completed using a completely unique finite detail code pfrac.
Based on the definition and connotation of the above-mentioned water-saving products, it can be divided into the following categories from the principles and approaches of water-saving:(1) Products that directly improve the use efficiency of water resourcesIt is a water-consumable product, and it can reduce water consumption compared to similar products under the condition of fulfilling the same function.(2) Products that reduce the loss of water resources and prevent pollutionIn the process of use, it does not consume water resources, but it can ensure that water resources are not lost and po
Pressure CompensationThe amount of pressure that flows through a drip irrigation system can fluctuate, depending on hose length and garden bed elevation, among other factors. This can cause emitters to flow differently than designed, with more or less water flow depending on pressure.To combat this, the best drip irrigation system emitters are pressure compensating by design. They’ll emit the same amount of water regardless of the pressure at their inlet (where they attach to the main hose).
Compared with the dripper, the most obvious feature of the pressure-compensated dripper is:1. The pressure compensation dripper can make the elastic silicone sheet change the section of the water outlet with the help of water conservancy pressure, automatically adjust the flow rate, and make the water output uniform;2. The pressure compensation performance is strong, and the automatic control water dispenser is the best choice. It is especially suitable for undulating terrain, unbalanced system pressure and need to increase capillary.How to choose a pressure compensation dripper?1.
Offer amazing insulation. tube protects the, metallic, cable, wood and and many others towards to quick circuit, corrosion, oxidation, decay, abrasion, fracture and and many others. software location; can used for sealing reason of power, facts, telecom cables and automotive, digital, plane, train, subway, port etc.
The arrangement and installation of the dripping belt: The branch pipes are arranged according to the row direction of grape planting. Generally, the branch pipe is arranged in the middle of the grape row, and the dripping belt is arranged according to the spacing of the grapes. If the planting row is too long, it can be divided into two groups from the middle part of the vineyard, and two valves can be installed to send the water to both sides respectively to implement group irrigation.Precautions for drip irrigation1. Prevent the drip hole from clogging.
1. AdvantagesSave water, fertilizer and laborDrip irrigation is a full pipeline water delivery and local micro-irrigation, which reduces the leakage and loss of water to the lowest limit. At the same time, because it can supply the water required by the crop root zone in a timely manner, there is no problem of peripheral water loss, and the water use efficiency is greatly improved. Irrigation can be conveniently combined with fertilization, that is, dissolve the chemical fertilizer and pour it into the irrigation system.
Precise filtration: Filter discs with exceptional precisions may be selected in step with the water requirements. There are 20 microns, 55 microns, one hundred microns, 130 microns, two hundred microns, 400 microns and other specifications, and the filtration ratio is extra than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
The Merits of Drip IrrigationAdvantages of any kind of watering rely On the types of vegetation grown, how properly the Weather behaves, and the plant overall performance You preference.