4L Pressure Compensation Emitter-manufacture,factory,supplier from China

Compared with the dripper, the most obvious feature of the pressure-compensated dripper is:1. The pressure compensation dripper can make the elastic silicone sheet change the section of the water outlet with the help of water conservancy pressure, automatically adjust the flow rate, and make the water output uniform;2. The pressure compensation performance is strong, and the automatic control water dispenser is the best choice. It is especially suitable for undulating terrain, unbalanced system pressure and need to increase capillary.How to choose a pressure compensation dripper?1.

One. Definition of current stabilizerThe stabilizer is composed of the upper part, the lower part, and the pressure compensation gasket, the lower part is the water inlet part, the upper part is the water outlet part, the upper part has the pressure compensation flow channel.Two.the characteristics of the current stabilizer1. The current stabilizing device is adopted, and the length of laying on the ground is more than 100 meters.2. The flow is stable and the uniformity reaches 90%.3. Strong resistance to plugging.4. Can be buried deep underground, does not affect the ground work.5.

1. Check the condition of the pressure gauge to see if it is working properly.2. Check the pressure values of pressure gauge 1 and pressure gauge 2, when the difference between the pressure values of the two pressure gauges exceeds 0.02GP, clean the filter screen.

When choosing a dripper, pay more attention to the flow rate, working pressure and scope of the dripper. The selection of these parameters should rely on a reasonable irrigation system, comprehensive crops, planting patterns, and soil quality.So for the dripper itself, we should also consider the following aspects when choosing:1. The manufacturing accuracy of the dripper. The uniformity of drip irrigation is closely related to the accuracy of the dripper. In many cases, the flow change caused by the manufacturing deviation of the dripper exceeds the flow change caused by hydraulics.

Flow RateOnce you’ve determined the plants and soil you have, you can figure out the plants’ water needs and choose the correct emitters.Even plants with low water needs can suffer in fast-draining, fast-drying soils. In this case, you’ll need to increase the size of point-source emitters or use in-line tubing with closer emitter spacing. Consider a 1 GPH emitter or 9-inch spacing for these scenarios.

Micro-spray TapeMicro-spray Tape are useful devices which can make the most of a low-pressure drip irrigation system. They install along taller vegetation or are used to hit a few flora with extra water needs whilst leaving much less-needy plant life by myself. They’re designed with progressed spray-range over other emitter-kinds with the identical strain.

Features of sheet type drip irrigation belt　1、Integrated flat drip head drip irrigation belt is an integrated drip irrigation belt with flat-shaped drip head set on the inner wall of the pipe belt, which is widely used in greenhouse greenhouses and irrigation of cash crops in large fields. 　　2、The drip head is integrated with the pipe belt, easy to install and use, low cost and low investment. 　　3、Drip head has self-filtering window, good anti-clogging performance. 　　4、Using labyrinth flow channel, with a certain pressure compensation effect.

Pressure CompensationThe amount of pressure that flows through a drip irrigation system can fluctuate, depending on hose length and garden bed elevation, among other factors. This can cause emitters to flow differently than designed, with more or less water flow depending on pressure.To combat this, the best drip irrigation system emitters are pressure compensating by design. They’ll emit the same amount of water regardless of the pressure at their inlet (where they attach to the main hose).

Drip irrigation drippers are generally made of low-pressure polyethylene. The pressure water flow in the capillary passes through the narrow and narrow channel in the dripper, so that after the energy is consumed, it drips into the soil drop by drop and evenly with a constant and uniform amount of water. Under the gravity of the droplet and the action of the capillary in the soil, it gradually wets soil. Drippers are widely used in irrigation fields such as orchards, greenhouses, greenhouses, gardening, and greening.

Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mCommon overall performance trends:The structure layout is cheap, whilst the water strain is small, it can also irrigateIt is appropriate for irrigation of fruit tree, shrub nursery, narrow garden and special flora, irrigation and cooling of greenhouse plantsThe rotary sprin

I. Composition of the microirrigation systemThe micro-irrigation system is composed of water source, front hub, water transmission and distribution pipe network, irrigation device, flow rate, pressure control parts and measuring instrument.1. Water sourceRivers, channels, lakes, reservoirs, wells and springs can be used as microirrigation water sources, and their water quality should meet the requirements of microirrigation.2.

Setting up a drip irrigation system can be daunting — there are so many products to choose from, and often hardware stores carry whacky supplies. First and foremost, don’t buy a soaker hose! A soaker hose is notorious for uneven watering, it breaks down quickly, and is a hassle to repair. There are far superior products that are cheaper, last longer, and are simple to repair. In short, there are three different drip products to use, depending on your application:• Half-inch emitter tubing.