20 Simple Three-way-manufacture,factory,supplier from China

(Total 24 Products for 20 Simple Three-way)
The appearance of simple three-way makes the installation of pipe and pipe fittings more convenient and quick in the project. It is made of engineering plastics, corrosion resistant, easy to install and use, and has long service life and economic and practical application.
  Contact Now
Product features:Connect 16 / 20mm PE pipe and butt with 16 / 20 mm PE pipeHigh strength product16/20MM socket-typeFunctions: 1. On-off valve 2. Regulating flow 3.
  Contact Now
Set combination Multiple combinations can meet your various needsAOne-outlet three small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way water separatorThree 50cm3/5PVC capillaries  Three small straight drip arrowsBOne-outlet three small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 four-way water separatorThree 50cm3/5PVC capillariesThree small straight drip arrowsCOne-outlet three big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 four-way&
  Contact Now
The three-way is pipe fittings and pipe connectors. Also known as pipe three-way or three-way pipe fittings, three-way joint, used in the main pipe to branch pipe.The three-way has three openings, namely one inlet and two outlets; Or a chemical pipe fittings with two inlets and one outlet, there are T-shape and Y-shape with equal diameter orifice or reducing orifice, which are used for the convergence of three same or different pipelines. The main function of three-way is to change the direction of fluid.
  Contact Now
Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
It can monitor the total injection amount of fertilizer and the instantaneous injection amount of fertilizer in real timeAdjustable instantaneous fertilizer injection (manual adjustment)Real time monitoring of working voltageReal time monitoring and alarm functions of various faults1. EC, PH (including sensor) Fertilizer concentration detection Water pH detection2. Mobile APP (including one-year service fee +.APP signal conversion)3. The automatic fertilizer mixing tank contains a mixing motor4. Weather station, soil moisture5. Automatic partition can reach 256 channels6.
  Contact Now
Set combination  Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries  Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook  One 4/7 to 3/5 single hookOne 3/5 three-way
  Contact Now
PE socket straight through valve is widely used in agricultural water-saving irrigation project. For example, small pipe outflow project and drip irrigation system (drip irrigation pipe), some projects that use PE pipes, and PEΦ16 or 20 capillary drip irrigation systems, etc.Through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.
  Contact Now
Model: Φ16mmMaterial: PEProduct advantages and characteristics:1.Scientific design, compact size, light weight, good sealing and interchangeability.2.Simple structure, convenient operation, quick connection and disassembly, strong flexibility, easy to recycle, beautiful and practical.3.Stable chemical properties, excellent performance, good cold-resistance, anti-aging, long service life.4.Compact size, light weight, good sealing and interchangeability.5.It is suitable for various working conditions and widely used in various media such as gas, liquid, powder, etc.
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
The product has many types, with the characteristics of quick and convenient connection and disassembly, good sealing performance, high strength and long service life. It is widely used in field micro -spray irrigation project.
  Contact Now
Functions: 1. On-off valve 2. Regulating flow 3.
  Contact Now
Purpose: the drip irrigation system uses the product when the tape is the main pipe. Branch water source, the main pipeline (soft tape) is connected with drip irrigation tape, so that the water in the main pipeline (soft tape) flows into the drip irrigation tape respectively.Usage: use a puncher (14mm in diameter) to make a hole on the side of the soft water tape, and then rotate the three-way into the soft tape hole, tighten the nut to fix the bypass on the soft water tape, and connect the drip irrigation tape on the other sideParameters:Model:16mmMaterial: PE plastic
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
Product features:It is made of new engineering plastics, with aging-resistant process and materials, long service life, mainly supporting export products.Scientific design, high strength, good sealing, convenient connection, easy disassembly, strong flexibility, easy recycling, beautiful appearance.It is mainly applicable to the irrigation of vegetables, fruit trees, shrubs, nurseries and other ground crops, and can be used for tree crown cooling and tree frost preventionSpraying and drip irrigation of plant cooling, urban environmental protection, lawn and other aspects.Instruc
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
Set combination  Multiple combinations can meet your various needsAOne-outlet four big straight drip arrow +current stabilizerOne 2L, 4L, 8L current stabilizerOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries Four big straight drip arrowsBOne-outlet four curved drip arrows + single hook  One 4/7 to 3/5 single hookOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries  Four curved drip arrowsCOne-outlet four curved drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 five-way water sep
  Contact Now
principle:When the filter is working normally, the pressurized water flows into the tank from the water inlet and reaches the filter layer evenly. When the water flows through the filter layer, the impurities are filtered and retained. There is a water trap with a valve at the bottom of the filter, and the filtered water is collected evenly and then flows out of the filtering equipment.With the continuous accumulation of impurities in the filter layer, the water flow loss continues to increase.
  Contact Now
Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
  Contact Now
The drip irrigation belt snap tee has the following advantages:   1. There are internal parts such as locking hoop, stepped ring seal ring, etc. The nuts on both sides can be disassembled for assembly and use, which improves the product reuse rate. And the product design is scientific and reasonable, the pipe fittings have high strength, good sealing performance, and no water leakage.   2. The drip irrigation belt positive female snap tee is easy to install and use, easy to disassemble, flexible, easy to recycle, beautiful and practical.
  Contact Now
Installation and usage: the product is used in the project of PE small pipe or drip irrigation pipe. Compared with the traditional PE socket straight through and bypass, the advantages are that the user can adjust the switch of each irrigation pipe tape and increase the controllability of the system.through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.
  Contact Now
Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life.
  Contact Now
At present, the built-in cylindrical drip irrigation pipe is Φ16 type drip irrigation pipe. According to the wall thickness, drip irrigation pipes can be divided into three types: 0.6mm, 0.8mm and 1.0mm. The normal working pressure is 0.08MPa-0.1MPa.
  Contact Now
Relate News
The pipe joint with three openings is called tee pipe. Tee pipe is widely used in the pipe network conveying liquid and gas. Due to different conveying media, the material of tee pipe is divided into: cast copper, cast aluminum, plastic, cast iron, cast steel, glass, etc. tee is also widely used.Introduction:As the name suggests, there are three openings, i.e. one in and two out, or two in and one out. It is a kind of chemical pipe fittings, T-shaped and Y-shaped. It has equal diameter nozzle and reducing nozzle. It is used for the collection of three identical or different pipelines.
Setting up a drip irrigation system can be daunting — there are so many products to choose from, and often hardware stores carry whacky supplies. First and foremost, don’t buy a soaker hose! A soaker hose is notorious for uneven watering, it breaks down quickly, and is a hassle to repair. There are far superior products that are cheaper, last longer, and are simple to repair. In short, there are three different drip products to use, depending on your application:• Half-inch emitter tubing.
There are various tube sizes for specific plant types. For the most part, drip tubes range between 12 mm to 20 mm in diameter. You will need to use an end cap or water will flow out to the opposite end and flood that part of your garden.
With the aid of using the tables and a  few easy equations, you may calculate the advantage of the usage of a bigger pipe.if that advantage is greater than the greater price to put in the larger pipe, and when you have the functionality for purchasing the larger preliminary yearly costs, over the lifestyles of that pipe you will be financially in advance to install the bigger size. desk 1 offers values as a way to be used to calculate annual financial savings because of reduced use of power.
Fertilization flow of three-channel fertilizer applicator:1. First of all, the dissolved fertilizer solution into the fertilizer pot, open the main pump, through the regulating valve will be filled with water, closed water injection valve (the process of irrigation valve can always open) . When fertilizing, the “Time knob”in the control cabinet is used to adjust the time of fertilizing, the pump starts, the fertilizer in the tank is pumped into the main pipeline water by the pump, and the fertilizing is finished at the same time.
This product is used when the drip irrigation system uses tape as the main pipeline. The branch water source, the main pipeline (soft belt) is connected with the drip irrigation belt, so that the water in the main pipeline (soft belt) flows into the drip irrigation belt separately.Use a punching machine (diameter 14mm) to make holes on the side of the soft water belt, then screw the tee into the hole of the soft water belt, tighten the nut to fix the bypass on the soft water belt, and connect the soft water belt to the other side of the drip irrigation belt.
In recent years, there are a variety of popular orchard irrigation methods, such as immersion irrigation, manual irrigation, water-saving irrigation, high-level sprinkler irrigation, and simple sprinkler irrigation. However, these technologies all have their shortcomings more or less. The cost of immersion irrigation is high, and the cost of manual irrigation is high. The effect is relatively poor. Water-saving water-saving irrigation has low one-time investment, high water-saving efficiency, simple maintenance in the later stage, and high-level sprinkler irrigation.
Precise filtration: Filter discs with exceptional precisions may be selected in step with the water requirements. There are 20 microns, 55 microns, one hundred microns, 130 microns, two hundred microns, 400 microns and other specifications, and the filtration ratio is extra than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.
1. The location of the water source and the head hub is generally selected in the middle of the plot, and the location is higher.2. When irrigating, the position of the water inlet is high, and ensure that the position of the drain well is at a lower position.3. Generally, the water delivery and distribution pipelines of the drip irrigation system can be divided into three-stage pipelines: main pipe, branch pipe, and capillary (drip irrigation tape (pipe)), and some systems are equipped with branch pipes. The pipelines at all levels are arranged vertically with their superior pipelines.4.
When the filter is working normally, the pressurized water flows into the tank from the water inlet and reaches the filter layer evenly. When the water flows through the filter layer, the impurities are filtered and retained. There is a water trap with a valve at the bottom of the filter, and the filtered water is collected evenly and then flows out of the filtering equipment.With the continuous accumulation of impurities in the filter layer, the water flow loss continues to increase.
Offer amazing insulation. tube protects the, metallic, cable, wood and and many others towards to quick circuit, corrosion, oxidation, decay, abrasion, fracture and and many others. software location; can used for sealing reason of power, facts, telecom cables and automotive, digital, plane, train, subway, port etc.
Pipe failure in long-term applications is characterised by creep crack initiation and creep crack growth. Both can be determined by fracture mechanics-based tests of the pipe materials. Nowadays, several accelerated tests are available: Considering new fiber composite polyethylene (pe) substances are contemplated for use by means of fuel industry, a chief assignment is to carry out a computational evaluation for the cracked and uncracked pipes. That is completed using a completely unique finite detail code pfrac.